Operating instructions
Installation
INSTALLATION
Television Location
This unit
is
intended to be used with
an optional stand or entertainment center. Consult your dealer for available options.
0
Avoid excessive sunlight or bright lights, including reflections.
0
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
0
Fluorescent lighting may reduce remote control transmitting range.
0
Keep away from magnetic equipment, including motors, fans and external speakers.
CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of
being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.
@
3
a
CT-32HL42, CT-32HL42U :
CAUTION: These television receivers for use only with PANASONIC TY-32HL42P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-32HX42, CT-32HX42U:
CAUTION: These television receivers for use only with PANASONIC TY-32HX40P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36HL42, CT-36HL42U :
CAUTION: These television receivers for use only with PANASONIC TY-36HL42P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
CT-36HX42, CT-36HX42U:
CAUTION: These television receivers for use only with PANASONIC TY-36HX40P stand. Use with other carts (or stands) is capa-
ble of resulting in instability causing possible injury.
Shielded audio and video cables should be used between components. For best results:
0
Use 75ohm coaxial shielded cables.
0
Use appropriate input and output connectors, that match your component connectors.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY iNSERTED
a:,@
TO PREVENT BLADE EXPOSURE.
Polarized plug
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT
E RECEPTACLES,
AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming Cable from
Connect the cable supplied by your local cable company to ANTI connection on back of television. Select cable
Cable Company
mode and ANTl in SET UP menu under Prog Chan (Program Channels).
h%
Note:
A cable converter box may be required for proper reception. Check with your local cable company for
@ m
compatibility requirements.
75 Ohm VHF/UHF
Antenna Connections
on back of TV
For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is
recommended.
.
Connect
home antenna to ANTI connection on back of television. Select TV mode and ANT1 in the
Incoming cab[e from
SET UP menu under Prog Chan.
Home Antenna
Cable Mode is preset at the factory.
Antenna users must change to TV Mode and
ANT
1 in
the Set Up
menu.