Operating instructions
REMOTE CONTROL OPERATION (MODELS
CX32HL42
AND
CT-36HL42)
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the
component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming
your
Remote Control with or without a code for the component.
Default Modes For Remote Control
DBS
VCR
DBS
(Preset)
Panasonic DBS Codes
VC.R (Preset) .,
Pan&&c
VCR Codes
DVD/CD
DVD and CD (Preset) Panasonic DVD
Codes
AUX
Personal V&u Recordqs, Panasonic;
Personal
Video
Tape and VCR2 -Reearders Code
RCVR
Audio Receiver (Preset) Panasonic RCVR Code
Determine the manufacturer of the component and look in the table for the code.
pfQgrajna?Lsin
Procedure
l
Confirm that the external component is plugged and operating.
.
Turn the component off.
ACTION
l
Press and B together, for at least 5 seconds.
l
Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV,
CABLE or DBS.
.
Enter the 3-digit component code using the Remote Control numeric keypad (0 - 9 buttons).
l
Press the Remote Control a to test the component. If the procedure was successful, the component will
turn on.
Helpful Hints: Unsuccessful Code
If
the
component
does not
operate
with the Remote Control, repeat
the procedure using another code. (Some
brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
ramming without a Code
This procedure searches all codes and is called the “sequence method.”
l
Confirm that the external component is plugged in and on.
.
Turn the component off.
ACTION
.
Press and a together, for at least 5 seconds.
.
Press appropriate component button on the Remote Control.
.
Press
VOL
) to move forward to the next code. Press 4 VOL to move backward.
.
Press the Remote Control B to test the component. If the procedure was successful, the component will turn
on.
Note: Repeat the above
sfeps until the component code is found. If may
fake many atfempts before the correct
code
is found.
ACTION
l
After the code is found, press
to store the code.