Service manual

8. FUNCTION OF THE CONVENIENT SERVICE

FUNCTION OF THE CONVENIENT SERVICE

■ The test mode of the load movement

You can check the PCB ASS'Y and the condition of each load movement simply.

• The method to enter

1 Press the Power switch button.

2 Press the Option button 3 times while press the Temp button.

At this time, the version is displayed on the Custom LED

3 Each load makes a movement as follows, whenever the Time Delay button is pressed a time.

1200(RPM) → C:H (Cold/Hot option)

→ L C (Lock Close) → H (Hot valve)

→ C (Cold valve) → P (Pre-Wash valve) → bb (bubble)

→ dr (drain pump) → L O (Lock switch Open)

■ The check mode of the water level frequency

You can check the beginning frequency and the frequency by the variation of the water level.

• The method to enter and operate

1 Press the Power switch button.

2 Press the Time Delay button 3 times while press the Temp button and the Spin button.

3 the beginning display on "18:88 LED" is the current frequency of the water level.

ex) 5 6 2 = 25.62kHz

: It display three number except the first number of 25.62kHz

4 When you press the Temp button a time → Cold valve On

2 times → Cold valve Off

3 times → Drain pump On