Operation Manual

E-12 E-13
E-12 E-13
The functions of the control panel (cont.)
* The Child Lock will be cancelled when power is off.
Steam(option)
Water +(option)
Steam(option)
Water +(option)
Option
■ DWC-LU102X/DWC-LU122X/DWC-LD142X/DWC-LD162X
Steam(option)
Water +(option)
Press this switch to turn the power on or off.
Steam(option)
Water +(option)
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the “Start/Pause” button → Select the program that you want to change →
press the “Start/Pause” button again.
Steam(option)
Water +(option)
You can select the course you want, and each lamp is turned on when that course
is selected.
For the more detailed information, please refer to the page 16~23.
Steam(option)
Water +(option)
It can be used to adjust temperature of water according to types of the load to be
washed.
As the button is pressed, temperature of water is selected by
Cold → 30°C → 40°C → 60°C → 95°C
Steam(option)
Water +(option)
By pressing the spin button, the spin speed can be chosen.
If press "spin button" spin RPM change.
Steam(option)
Water +(option)
You can select the course you want, and each lamp is turned on when that course
is selected.
As the button is pressed, the wash course is selected by
Wash → Soak → Pre-Wash
Steam(option)
Water +(option)
You can select the course you want, and each lamp is turned on when that course
is selected.
It can be used to pre-engage time for wash.
Steam(option)
Water +(option)
• Steam - During washing time Steam is sprayed in Drum. Laundry is more clean.
• Water + - If you want to use more water, press this button.
Steam(option)
Water +(option)
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
Steam(option)
Water +(option)
Use to memory program you want.