Operation Manual

E-8
Electrical requirements (cont.)
Operating your washer
2 Adjust the level of washer using adjustable legs.
• Please check if there is any gap between the
four adjustable legs and the floor.
• After the adjustment is finished, turn the fixing
nuts up tightly so that the wash maintains the
adjustment.
3 Make it sure that the washer does not sway
when you press down the four corners of the
washer’s top plate.
To obtain the best washing results, you must operate your washer properly.
This section gives you this important information.
Preparing clothes for washing
• Remove pins, buckles, coins and other hard objects from clothings, pockets, etc before putting the load into
the washing machine. Failing to remove these items can cause malfunction or damages to the drum
assembly, pump and other components.
• Close zippers, snaps, and hooks to avoid snagging other items.
Remove pin, buckles, and other hard objects to avoid scratching the washer interior.
• Empty pockets and pull them inside out.
• Turn down cuffs and turn synthetic knits inside out to avoid pilling.
• Tie strings and sashes to avoid tangling.
• Treat spots and stains. (See “Removing stains” on page 28)
Fixing Nut
adjustable leg
NOTE
There should be no swaying of washer and all the adjustable legs
should stick to the floor closely.
DWC-LD141X_DWD-LD141X(영)_영국향.indd 8 2015-03-03 오후 4:32:29