S/M No. : DW200C0001 Service Manual Auto Washer Model : DW-1300 • Caution: In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). Jul.
SHER AUTO WASHER TO WASHER SHER SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AU AUTO WASH Contents WASHING MACHINE AU AUTO WASH AUTO WASHER AUTO WASHER AU AUTO WASH AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER
1. SPECIFICATIONS NO. ITEM 1 POWER SOURCE 2 POWER CONSUMPTION VOLTAGE SPECIFICATIONS AC 110V AC 220V FREQUENCY WEIGHT 50Hz 60Hz 650W NON PUMP 580W 600W NET : 924X542X1025, PACKED UP : 938X558X1040 (WXDXH) PUMP NET : 39kg, PACKED UP : 42.5kg NON PUMP NET : 38kg, PACKED UP : 41.5kg STRONG, NORMAL, SOFT HIGH:90l, MEDIUM:80l, LOW:70l, SMALL:60l 7 REVOLUTION WASH SPIN 100 rpm 100 rpm 1700 rpm 1400 rpm WASH MAX. 15 min., Manual operation SPIN MAX. 5 min.
2. EXTERNAL VIEW Structure Of The Washing Machine Control Panel (Panel b Ass’y) 1 2 3 1 WASH TIMER Use to select the desired time for washing or rinsing. 2 WASH ACTION Use to select wash action. (“STRONG”, “NORMAL”, “SOFT”) 3 LEVER WATER SUPPLY SELECTOR Left : water supply in the WASH TUB. Right : water supply in the BASKET SPIN. 4 5 6 5 VALVE SELECTOR Select “WASH, RINSE” for washing and rinsing, and “DRAIN” to drain the water.
3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS Wash Timer WORK PRINCIPLE INSTRUCTION I. Time part 1. The extro force will make 7(main shaft), 4, 6(cam) and 37(first cam) rotate clockwise to a certain angle, then 43(spring) transmogrify and accumulate power, the both sides of 48, 49(reed) be contacted, move limitation of 8(sway slice) was released. When the force is released, 8(sway slice) swift by constant frequency.
Spin Timer FUNCTION The spin timer is the switch providing power to the SPIN MOTOR(DRAIN PUMP MOTOR) during the set spin dry time, and is a spring-type time switch comes on turning and those contact points comes off after the set time. STRUCTURE AND PRINCIPLE OF ACTIVATION 1) The main shaft turns due to the unwinding force when the spin timer is turned, the spring wound with that force being delivered through each gear and the spring slowly unwinding at a speed finally controlled by the angle assembly.
BRAKE SYSTEM When the DOOR SPIN is opened, LINK BRAKE which connect to DOOR SPIN loosens. And then the BRAKE BAND touches the DRUM COUPLING assembly and stops the BASKET SPIN as it is pulled by the SPRING in the BRAKE FIX PLATE assembly. LINK BRAKE BASKET SPIN BRAKE BAND GAP CONTROL METHOD The BAND BRAKE works best when the gap between it and the DRUM COUPLING is about 2mm when the DOOR SPIN is closed.
GEAR HOUSING ASS’Y The GRAR HOUSING ASSEMBLY is a transmission device which turns the PULSATOR at 6:1 lowered speed through the gear unit assembly which receives power at the GEAR SHAFT UNIT. STRUCTURE 1) The two sides of the GEAR SHAFT UNIT are supported by the OILLESS BEARING in the GEAR HOUSING ASSEMBLY. 2) The GEAR UNIT ASSEMBLY is connected to the GEAR SHAFT 1 and GEAR SHAFT UNIT by the GEAR and GEAR UNIT respectively.
4. DIRECTION FOR DISASSEMBLY AND ASSEMBLY Ass’y Panel Back 1. Remove 3 screws on the PANEL B. 2. Remove KNOB, wash timer and spin timer on the PANEL B. 3. Remove 5 screws and CONTROL LEVER Basket Spin 4. Remove 4 screws on the COVER BACK. 8 5. Separate LINK BRAKE and ASSEMBLY BRAKE WIRE.
6. Remove bolt and nut on the upper side of the DRUM COUPLING AS. 7. Remove the PLATE T on the TUB. 8. Lift up the BASKET SPIN. Ass’y Base Under 9. Remove 1 screw on the CABINET. 10. Separate HARNESS AS connectors.
10 11. Remove a V-BELT from PULLEY MOTOR. 12. Turn over the washing machine. 13. Remove 7 screws on the BASE UNDER ASSY. 14. Remove 3 screws on the BRACKET MOTOR, and remove the SPIN MOTOR. 15. Remove 3 bolts on the BASE UNDER, and remove the WASH MOTOR. 16. Remove 1 screw on the FIXTURE PUMP.
5. TROUBLESHOOTING GUIDE NOTES Pull out the power plug to repair and make sure that the Washing Machine has been properly grounded. Concerning Wash PROBLEM CHECK POINT CAUSE Is the Power properly connected? NO SOLUTION Reconnect the Power Cord. YES Is there a whirring sound from the Wash Motor when turned on? YES NO Is the Condeser properly connected? Pulsator does not rotate. Motor does not start due to opening the Condenser circuit Reconnect the Condenser.
PROBLEM CHECK POINT CAUSE SOLUTION YES Pulsator does not rotate smoothly. Does the Gear Housing Shaft rotate properly when the Pulsator has been disassembled? NO NO Is the wiring of Wash condenser properly connected? Pulsator. only rotates in one direction. Worn out the Serration within the Pulsator. Replace Pulsator. Defective Gear Housing Replace Gear Housing As. Improper Connection Reconnect Improperly Wiring Reconnect the Wash Timer. Defective Wash timer Replace Wash Timer.
PROBLEM CHECK POINT CAUSE SOLUTION YES Brake wire is too long. The Brake Band is touching the Drum Coupling Assembly. Assemble after loosening LINK BRAKE and adjusting downward. NO BRAKE SPRING is broken. Replace Brake Spring. Power has been cut off by the Thermal Protector Power restored when motor cools. Improper wiring Reconnect wiring Defective connection Replace Door Switch or reshape the Lever. Improper wiring Reconnect the terminal. Defective Spin Timer Replace the Spin Timer.
PROBLEM CHECK POINT CAUSE SOLUTION NO Is the Bellows Assembly properly assembled? There is leakage during spinning. Re-assemble Bellows Assembly. The Waterseal or the Oilless Metal in the Bellows Assembly is worn out. Replace Bellows Assembly. YES NO The Brake Band touches the Drum Coupling when the Door Spin open. YES Basket Spin does not stop with the Door Spin open Waterproofing not working due to defective assembly.
PROBLEM Draining does not function during drain selecting CHECK POINT CAUSE Is the Drain Selector in the DRAIN position YES The position is fault. Turn the Drain Selector to DRAIN. Defective wiring Reconnect wiring Defective Pump motor Replace Pump Motor NO NO Is the pump Motor wiring properly connected? YES Are the wiring of the Spin Timer and the Pump Motor good? Drain does not function during Spinning.
6.
✔ Caution : In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). ass’y panel NO. PART NAME PART CORD SPECIFICATION Q’TY REMARKS 1 DECO KNOB 3611630400 ABS-TR 4.0 2 KNOB 3613404700 ABS 4.0 3 DECORATOR PANEL 3611630500 ABS-TR 1.0 4 PANEL B 3614281900 HIPS 1.
Ass’y Tub 10 11 16 15 17 5 12 6 19 8 4 13 18 14 9 7 3 1 2 29 26 25 20 27 28 21 22 3 29 23 30 24 18 31 32
✔ Caution : In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). ass’y tub NO. 1 2 PART NAME TUB DOOR WASH COVER DOOR WASH 3 PULSATOR AS PART CORD SPECIFICATION Q’TY REMARKS 3618820100 PP 1.0 36117AB100 HIPS 1.0 36117AAZ00 ABS-TR 1.0 OPTION 3611425200 HIPS 1.0 OPTION 3619706800 PP 1.
Ass’y Main 5 4 2 3 26 27 25 30 29 1 28 31 15 32 33 24 40 35 43 42 34 14 39 13 21 22 37 20 36 12 38 11 23 10 9 8 18 19 17 41 7 16 20 6
✔ Caution : In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). ass’y main NO.
NO.
7. WIRING DIAGRAM Single Voltage/Normal SAFETY S/W SPIN TIMER RD WASH TIMER BL BL VT 1 1 RD BK 3 2 1 3 2 1 BK VT BL WH VT BL 3 2 1 3 2 1 WH VT BL BK VT BL PK WH 4 3 2 1 4 3 2 1 3 2 1 3 2 1 RD WH PK 1 2 1 2 PK WH VT BL RD WH PK BK WH BK BK WH SPIN MOTOR BK(BR) UNIT CAPACITOR GN(GN/YW) B WASH MOTOR A WH(BL) GN(GN/YW) (EARTH) RATING VOLTAGE(V~) 110 Hz CAPACITOR 120~ 127 220 BK:BLACK BL:BLUE RD:RED PK:PINK WH:WHITE 220~ 240 60 60 50/60 50 A 45.6 41.6 10.4/9.7 10.4/9.
Dual Voltage/Normal CAUTION TIMER SPIN SAFETY S/W NO BK BL 1 1 BL 1 1 RD TIMER WASH OR RD GY BR YW RW WP WN 3 4 5 6 7 8 9 SW VOLTAGE CHANGE 220V C 3 4 5 6 7 BR RL GY SW VOLTAGE CHANGE 110V or 127V D 8 9 1 2 3 4 BK RL 2 BL 1 5 6 7 D V~ 9 FUSE 250V/6A 1 1 127/220 A 22.8x2 20.8x2 20.8 B 20.
DAEWOO ELECTRONICS CORP. 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: “DAEWOOELEC” S/M No. : DW200C0001 PRINTED DATE: Jul.
