LCD TEVISION DLV-22T1
CONTENTS Safety Precautions Power Supply 1 Installation 2 Use and Maintenance 3 Important Safety Instructions 4~5 User Guidance Information Names of each part(Front View) / Accessories 6 Names of each part(Back View) 7 Mounting on a Desktop / Installation Precautions 8 Installing an Antenna 9 Remote control Precautions / How to use remote control 10~11 12 Connection VCR Connections / Watching Video Tape 13 Satellite/Cable TV Set-Top Box Connections / Watching Cable TV 14 PC Connections
1
2
3
4
5
User’s Guide Power Cable Adaptor Remote Control 6
out 1 2 3 4 5 6 7 8 9 11 1 DC POWER IN(DC 12V 5A) 5 S-VIDEO 9 HEADPHONE OUT 2 HDMI 6 VIDEO 10 RF 3 VGA(D-Sub 15PIN) 7 AUDIO IN (R/L) 11 COAX OUT 4 YPbPr 8 PC AUDIO IN Power Connecting 1. Connect the small round plug on the power adaptor cable to the power input socket at the rear of the set. 2. Connect the mains cable between the power adaptor and the mains supply.
8 8 8
out Press TV/AV button on the remote control to diplay the input source menu, press press button to confirm. Then you can receive the signal.
DTV Buttons for TELETEXT operating You could use the functions of the buttons only in TELETEXT. TV/TXT Turn off/on the Teletext display. CANCEL Cancel the Teletext display. REVEAL Reveal any hidden text. DTV Buttons for Basic operating MENU Press to diplsy the OSD menu. CH+/Channel/Program +/-. VOL+/Volume +/-. POWER Turn the TV on/standby TV/AV Display the input source menu. EXIT Switch to DTV source. HOLD Hold or carry on the current subpage.
DTV PICTURE Press repeatedly to cycle through the available video picture modes. SOUND Press to cycle through the different sound settings. NICAM/A2 Nicam/A2 select. MUTE Press to mute the sound. Press again or press VOL+ to unmute. SLEEP Shutdown timer. INFO Means information, to display brief information concerning the current channel you are viewing. SUBTITLE To switch the dialog at the bottom of the screen. CHANNEL LIST Display the programs list.
12
out out AV2 IN , press OK button to comfirm.
out out AV2 IN out AV2 IN , press OK button to comfirm.
out , press OK button to comfirm.
Connection Headphone Connections Connecting to the headphone out Digital Amplifier Connections Connecting to the Digital Amplifier Coax Cable out 16
DTV TV Component VGA HDMI AV S-VIDEO 17
MENU and Use the buttons to select your main menu option. Allows you to customize the aound options and effects. SOUND PICTURE Picture Mode SoundMode Standard Standard Treble 50 Contrast 50 Bass Brightness 50 Balance Colour 50 AutoVolume On Sharpness 50 SurroundSound Off Tint 50 50 0 TIMER MENU: OPTION MENU: Allows you to setup a variety of timer options. Allows you to setup a variety of setup options.
PICTURE Picture Mode Medium Contrast 50 Red 50 Brightness 50 Green 50 Colour 50 Blue Sharpness 50 Aspect Ratio Tint Use the menu. PICTURE Color Temperature Standard and 0 Noise Reduction buttons to select the PICTURE menu(as the picture above), press 50 16:9 On button to enter the Picture Mode Cycles among picture display modes: Standard, Dynamic, Mild, User. Contrast Controls the difference between the brightest and darkest regions of the picture.
SOUND SoundMode Standard Treble 50 Bass 50 Balance Use the menu. 50 AutoVolume On SurroundSound Off and buttons to select the SOUND menu(as the picture above), press Sound Mode button to enter the Allows you to select among: Standard, Music, Movie, Sports and Personal. Treble(Could be adjusted when the sound mode is User) Controls the relative intensity of higher pitched sounds. Bass(Could be adjusted when the sound mode is User) Controls the relative intensity of lower pitched sounds.
Application Customizing the TIMER Settings TIME Clock Off Time Off On Time Off Sleep Timer Off Auto Sleep TimeZone Use the menu. and On Western Australia GMT+8 buttons to select the TIMER menu(as the picture above), press button to enter the The TIMER menu includes the following options : 21 Clock Use the and buttons to select the position, and use the and button to set the time. Note: User can not change time manually during DTV mode, for time is from signal source directly.
Application Customizing the SETUP Settings OPTION Language English Audio Language English English Subtilte Language Australia Country Restore Factory Default Use the menu. and buttons to select the OPTION menu(as the picture above), press button to enter the The SETUP menu includes the following options: Language Allows you to select menu language. Audio Language (Could be selected in TV mode) Allows you to select audio language.
Application Customizing the LOCK Settings LOCK Lock System Off Set Password Block Program On Block Parental Guidance Use the and buttons to select the LOCK menu(as the picture above), press menu. Note: You should enter the code to operate the menu.(original code is 0000) button to enter the Please enter password The LOCK menu includes the following options : Lock System When turn on, the user can not manual search and program edit.
Application Customizing the LOCK Settings HOTEL LOCK HOTEL LOCK HOTEL LOCK Off SOURCE LOCK CHANNEL LOCK Off MAX VOLUME KEY LOCK 100 Off HOTEL LOCK: Press to select Hotel Lock and press and SOURCE LOCK: Press and to select the ON or OFF. to select Hotel Lock and press to select the source for the initial input source, Note: The current using channels can not be locked.
Application Customizing the CHANNEL Settings CHANNEL Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit Use the menu. and buttons to select the CHANNEL menu(as the picture above), press button to enter the The CHANNEL menu includes the following options : Auto Tuning Press DTV Manual Tuning Press button to enter the submenu. Press or button to select a channel and press OK button to start search.
Application Customizing the CHANNEL Settings Program Edit: Press button to enter the submenu as the following picture. Delete: Select a program, and press RED button, on the right of program, “Delete” will appear, then press RED button again, the program will be deleted. If you press “RED button once,but do not want to delete the program, press “menu” to quit.
Maintenance and Service Trouble shooting Do not use other functions that are not mentioned in this user’s manual. In case a problem occurs with your LCD TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. Problem Action The screen does not appear. Is the power plug pulled out? Insert the power plug. Press the power button of the remote control. The screen appears too slowly after the power is turned on.
Maintenance and Service Specifications LCD Panel Panel Size 22” TFT LCD Ratio 16:9 Max. Resolution Input Connector Output Connector 1680 x 1050 VIDEO 1 S-VIDEO 1 YPbPr 1 AUDIO (L/R) 1 PC/AUDIO(L/R) 1 HDMI 1 RF 1 HEADPHONE 1 COAX 1 Power Source DC 12V 5A Power Consumption 60W The cabinet design and electronics specifications will be modified without prior notice for improving the performance.
