Specifications

5A2 – 216IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
21. Using a plastic hammer, remove the 16 bolts and
transaxle housing.
22. Remove the differential gear from the transaxle
case.
23. Clean the contact surface of the differential case.
24. Heat the ring gear in water and boil for 10 minutes.
25. Carefully remove the ring gear from the water.
26. After the moisture on the ring gear has completely
evaporated, quickly install the ring gear to the differ-
ential case.
27. Install the 8 bolts.
Tighten
Tighten the bolts to 102 NSm (75 lb–ft).