Specifications

AISIN AUTOMATIC TRANSAXLE 5A2 – 215
DAEWOO V–121 BL4
17. Install the transaxle housing and 16 bolts of the
transaxle housing temporarily.
18. Tighten 8 or 9 bolts out of 16 bolts of the transaxle
housing completely.
Tighten
Tighten the bolts to 29 NSm (22 lb–ft).
19. Using differential preload adapter DW240–130, turn
the differential gear assembly right and left 2 or 3
times to allow the bearing settle.
20. Using differential preload adapter DW240–130 and
small torque wrench, measure the preload of the
differential gear.
S Preload:
New bearing: 0.78–1.37 N.m (6.9–12.2 lb –in)
Used bearing : 0.39–0.69 N.m (3.5  6.1 lb–in)
If the preload is not within the specification, re-
move the differential from the transaxle case.
Re–select the transaxle case side adjusting
shim according to the following table.
S Adjusting shim thickness :mm (in.)
Mark Thickness Mark Thickness
A 1.80 (0.0709) N 2.26 (0.0890)
B 1.85 (0.0728) P 2.29 (0.0902)
C 1.90 (0.0748) Q 2.32 (0.0913)
D 1.95 (0.0768) R 2.35 (0.0925)
E 2.00 (0.0787) S 2.40 (0.0945)
F 2.05 (0.0807) T 2.45 (0.0965)
G 2.08 (0.0819) U 2.50 (0.0984)
H 2.11 (0.0831) V 2.55 (0.1004)
J 2.14 (0.0843) W 2.60 (0.1024)
K 2.17 (0.0854) X 2.65 (0.1043)
L 2.20 (0.0866) Y 2.70 (0.01063)
M 2.23 (0.0878)