Specifications

5A2 – 212IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
Assembly Procedure
1. Using transaxle housing side bearing outer race
adapter DW240–140 and adapter handle
DW240–170, install a new side bearing outer race
into the transaxle housing.
2. Install the shim to the transaxle case.
Notice : First install a shim of the same thickness as be-
fore.
3. Install a new side bearing outer race into the trans-
axle case.
4. Coat the thrust washers, side gears, pinion gears
and pinion thrust washers with ATF.
5. Install the 2 differential side gear thrust washers to
2 differential side gears.
6. Install the 2 side gears with 2 thrust washers, 2 pin-
ion gears and 2 pinion thrust washers into the dif-
ferential case.
7. Coat the pinion shaft with ATF.