Specifications

5A2 – 200IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
7. Install the 2 gaskets, plate and lower valve body
cover.
8. First, tighten the bolts indicated by arrows tempo-
rarily and then tighten the other bolts temporarily.
9. Tighten all the bolts completely.
Tighten
Tighten the bolts to 11 NSm (97 lb–in).
S Bolt length:
Bolt A: 49 mm (1.93 in.)
Bolt B: 20 mm (0.79 in.)
Bolt C: 60 mm (2.36 in.)
10. Install the 5 shift solenoid valves with the 6 bolts.
Tighten
Tighten the bolts to 11 NSm (97 lb–in).
S Bolt length:
Bolt A: 49 mm (1.93 in.)
Bolt B: 20 mm (0.79 in.)
11. Install the manual valve.
12. Make sure that the primary regulator valve is posi-
tioned in the same place where it was removed.