Specifications

AISIN AUTOMATIC TRANSAXLE 5A2 – 193
DAEWOO V–121 BL4
Tools Required
DW240–160 Transaxle Case Outer Tapered Roller Bear-
ing Race Adapter
DW240–170 Adapter Handle
Disassembly Procedure
1. Using a suitable puller, remove the tapered roller
bearing from the transaxle case side.
2. Using a press, remove the counter driven gear.
3. Using a suitable puller, remove the tapered roller
bearing.
4. Using a suitable puller, remove the outer tapered
roller bearing race and shim from the transaxle
case.
5. Using a suitable puller, remove the outer tapered
roller bearing race from the transaxle housing.
Assembly Procedure
1. Install a new outer tapered roller bearing race into
the transaxle housing.
Notice : Press–fit the outer tapered roller bearing race un-
til it contacts the transaxle housing.