Specifications

5A2 – 176IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
5. Install the direct clutch return spring.
6. Place brake/clutch spring compressor DW240–020
and direct clutch adapter DW240–040 on the return
spring and compress.
7. Using a snap ring expander, install the snap ring.
Notice : Stop the press when the piston return spring is
lowered to the place 1–2 mm (0.039–0.078 in.) from the
snap ring groove, preventing the piston return spring from
being deformed.
Notice : Do not expand the snap ring excessively.
8. Install the 2 plates, 2 discs and flange.
S Before installing the discs, coat them with
ATF.Install in order: P  D  P  D – F
(P = Plate, D = Disc, F = Flange)
9. Using a screwdriver, remove the snap ring.
10. Check that end gap of the snap ring is not aligned
with one of the cutouts.