Specifications

5A2 – 174IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
12. Remove the 2 seal rings from the input shaft.
Notice : Do not expand the ring ends excessively.
Inspection Procedure
1. Check to see if the sliding surface of the disc, plate
and flange are worm or burnt. If necessary, replace
them.
S If the lining of the disc is peeling off or discol-
ored, or even if a part of the printed number is
defaced, replace all discs.
S Before assembling new discs, soak them in ATF
for at least 15 minutes.
2. Using vernier calipers, measure the free length of
the direct clutch return spring together with the
spring sheet.
S Standard free length: 36.04 mm (1.4189 in.)
3. Check that the check ball is free by shaking the di-
rect clutch piston.
4. Check that the valve does not leak by applying low–
pressure compressed air.