Specifications

5A2 – 168IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
Disassembly Procedure
1. Turn the drive gear with 2 screwdrivers and make
sure it rotates smoothly.
Notice : Be careful not to damage the oil lip.
2. Remove the 8 bolts and stator shaft.
Notice : Be careful not to let the driver drop as it might
come off attached to the stator shaft.
3. Remove the oil pump drive gear and driven gear
from the oil pump body.
Inspection Procedure
1. Push the driven gear to one of side of the body.
Using a feeler gauge, measure the clearance.
S Standard body clearance:
0.10  0.17 mm (0.0039  0.0067 in.)
S Maximum body clearance: 0.17 mm (0.0067 in.)
If the body clearance is greater than the maxi-
mum, replace the oil pump body sub–assembly.