Specifications

5A2 – 164IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
124. Install the No.1 breather plug.
125. Install the input shaft speed (ISS) sensor with
the bolt.
Tighten
Tighten the bolts to 5.4 NSm (48 lb–in).
126. Coat a new O–ring with ATF, install it to the
screw plug.
127. Install the screw plug to the transaxle case.
Tighten
Tighten the bolts to 7.4 NSm (65 lb–in).
128. Coat new 2 O–rings with ATF, install them to
the unions.
129. Install the 2 unions to the transaxle case.
Tighten
Tighten the unions to 25 NSm (18 lb–ft).
130. Install the TR switch onto the manual valve
lever shaft and temporarily install the 2 adjusting
bolts.
131. Install a new lock washer and nuts.
Tighten
Tighten the nuts to 12 NSm (106 lb–in).