Specifications

5A2 – 160IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
104. Remove any packing material and be careful
not to get oil on the contacting surfaces of the
transaxle housing or transaxle case.
105. Apply FIPG (formed in place gasket) to the
transaxle housing.
FIPG: Three bond 1281 or equivalent.
Seal bend width: 1.2 mm (0.047 in.)
106. Install the transaxle housing to the transaxle
case with the 16 bolts.
Tighten
Tighten the bolts to 29 NSm (22 lb–ft).
S Apply seal packing or equivalent to the 3 bolts
indicated by arrows.
107. Coat a new O–ring with ATF, install it to the
transaxle wire.
108. Install the transaxle wire the to the transaxle
case with the bolt.
Tighten
Tighten the bolts to 5.4 NSm (48 lb–in).