Specifications

AISIN AUTOMATIC TRANSAXLE 5A2 – 147
DAEWOO V–121 BL4
45. Turn the spacer and lever shaft to align the small
hole for locating the staking position in the spacer
with the staking position mark on the lever shaft.
46. Using a pin punch, stake the spacer through the
small hole.
47. Check that the spacer does not turn.
48. Install the manual detent spring with the bolt.
Tighten
Tighten the bolts to 9.8 NSm (87 lb–in).
49. Install the parking lock shaft, torsion spring and
parking lock pawl.
Notice : Check that the edge of torsion spring fits into the
groove securely.