Specifications

5A2 – 140IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
14. Install the shim to the transaxle case.
Notice : First install a shim of the same thickness as be-
fore.
15. Install a new bearing outer race into the transaxle
case.
16. Using transaxle case oil seal installer
DW260–031–02 and a hammer, drive in a new
transaxle case oil seal.
S Oil seal in depth: 4.3 mm (0.169 in.)
17. Install the shim to the transaxle case.
Notice : First install a shim of the same thickness as be-
fore.
18. Using transaxle case outer tapered roller bearing
race adapter DW240–160 and adapter handle
DW240–170, press in a new outer tapered roller
bearing race into the transaxle case.
Notice : Press–fit the shim until it contacts the transaxle
case.
19. Install the No.1 transaxle case plate to the trans-
axle case with the bolt.
Tighten
Tighten the bolt to 9.8 NSm (87 lb–in).