Specifications

AISIN AUTOMATIC TRANSAXLE 5A2 – 139
DAEWOO V–121 BL4
9. Using transaxle housing oil seal installer
DW260–031–01 and a hammer, drive in a new
transaxle housing oil seal.
S Oil seal in depth: 3.1mm (0.122 in.)
10. Install a new outer tapered roller bearing race into
the transaxle housing.
Notice : Press fit the outer tapered roller bearing race un-
til it contacts the transaxle housing.
11. Install the transaxle lube apply pipe and differential
gear lube apply pipe to the transaxle housing.
12. Install the No.1 transaxle apply pipe clamp to the
transaxle housing with the bolt.
Tighten
Tighten the bolt to 5.4 NSm (48 lb–in).
13. Install the oil reservoir lock plate to the transaxle
housing with the 3 bolts.
Tighten
Tighten the bolts to 5.4 NSm (48 lb–in).