Specifications

5A2 – 138IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
5. Coat 2 new O–rings with ATF, install them to the
O/D brake piston.
6. Coat the O/D brake piston with ATF, install it to the
transaxle rear cover.
Notice : Be careful not to damage the O–rings of the O/D
brake piston.
7. Using brake/clutch spring compressor DW240–020,
overdrive brake adapter DW240–050 and a driver,
install the O/D brake return spring and snap ring to
the transaxle rear cover.
Notice : Stop the press when the O/D brake piston is low-
ered 1–2 mm (0.039 0.078 in.) from the snap ring groove,
preventing the O/D brake piston from being deformed.
8. Using transaxle housing side bearing outer race
adapter DW240–140 and adapter handle
DW240–170, install a new side bearing outer race
into the transaxle housing.