Specifications

AISIN AUTOMATIC TRANSAXLE 5A2 – 135
DAEWOO V–121 BL4
88. Using a suitable puller, remove the counter driven
gear outer tapered roller bearing race from the
transaxle housing.
89. Using a driver, remove the oil seal from the trans-
axle housing.
Notice : Be careful not to damage the transaxle housing
when removing the oil seal using a driver.
90. Using a suitable puller, remove the side bearing
outer race from the transaxle housing.
WARNING : USE CAUTION WHEN REMOVING SNAP
RINGS OR PERSONAL INJURY MAY RESULT.
Notice : Stop the press when the O/D brake piston is low-
ered 1–2 mm (0.039–0.078 in.) from the snap ring groove,
preventing the O/D brake piston from being deformed.
91. Using brake/clutch spring compressor DW240–020,
overdrive brake adapter DW240–050 and a driver,
remove the snap ring.
92. Remove the O/D brake return spring.