Specifications

5A2 – 134IAISIN AUTOMATIC TRANSAXLE
DAEWOO V–121 BL4
82. Using a suitable puller, remove the counter driven
gear outer tapered roller bearing race and shim
from the transaxle case.
83. Using a driver, remove the oil seal from the trans-
axle case.
Notice : Be careful not to damage the transaxle case
when removing the oil seal using a driver.
84. Using transaxle case side bearing outer race adapt-
er DW240–150 and adapter handle DW240–170,
remove the transaxle case side bearing outer race
and shim.
85. Remove the 3 bolts and oil reservoir lock plate from
the transaxle housing.
86. Remove the bolt and No.1 transaxle apply pipe
clamp from the transaxle housing.
87. Remove the transaxle lube apply pipe and differen-
tial gear lube apply pipe from the transaxle housing.