Specifications

DTC-325

Affordable Tools for Digital-TV Professionals March 2015

6.2.3. Confirm registry settings

Although the registry settings are performed automatically by the DtGrabber+ installer, in case of

any trouble please check this section’s details.

To permit the Windows SNMP service to communicate with DekTec applications, the VISNMP.dll is

provided and is referenced in the Windows Registry. From “Start” menu, select “Run Command” and

type the command “regedit” to launch the Registry Editor. Make sure that in the location:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SNMP\Parameters\ExtensionAgents]

(in case a 64 bit version of Windows is being used) or:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service\SNMP\Parameters\ExtensionAgents]

(in case of 32 bit Windows), the following line is added:

"SOFTWARE\VI\SNMP\CurrentVersion".

HKEY_LOCAL_MACHINE Registry Settings – add the link to SOFTWARE/VI/SNMP/CurrentVersion

Finally, check that in the location [HKEY_LOCAL_MACHINE\SOFTWARE\VI\SNMP\CurrentVersion],

the following line has been added for the variable “Pathname”:

”C:\Program Files\DekTec\DtGrabber+\VISNMP.dll” and that the file is present in the C:\Program

Files\DekTec\DtGrabber+\ directory.

6.3. Enabling/Disabling SNMP control from DtGrabber+

To enable the SNMP Control of the DtGrabber+, click on the Remote Control button in your control

area. Once enabled, the Remote Control button will be displayed in yellow as illustrated below.