Specifications

DTC-325

Affordable Tools for Digital-TV Professionals March 2015

SNMP Service properties setting – Traps tab and LogOn tab

Now from the tab Security, check the checkbox "Send authentication trap". Click "Add" under

"Accepted community names". On appearing dialog box, select "READ WRITE" on "Community rights",

enter "public" on "Community name", and click "OK". If you want to accept requests only from a

particular client, then select "Accept SNMP packets from these hosts" and click "Add" underneath that.

Type the host name or IP address and click "OK" on the appearing dialog box. After all this, click

"Apply" or "OK" and close the "SNMP Service"’s “Properties dialog.

Security tag - SNMP service properties