Specifications

DTC-325

Affordable Tools for Digital-TV Professionals March 2015

In the Set Up Day area, one can specify a date (“One-Shot” recording), or one or multiple day of

the week (like every Wednesday and Friday), or a repeatation every X days starting from a specific

date.

In the Set Up Time area, one can specify the recording start and stop times. It is also possible to

specify a multiple file recording. After checking the path on disk for the scheduled recording, click on

“Add Schedule” to add the schedule to your Schedule List. Each new schedule receives an ID and is

displayed in the Schedule List.

If the Start Time is later then the Stop Time, the application will assume automatically that Stop Time

is for the following day of the start time. If so, the End Time will be displayed with mention “(+1)” in

the Schedule List

To save a schedule list in a text file or to restore a schedule list from file, use the “Save Schedule List”

and “Open Schedule List” buttons. To delete a schedule from the list, click on the schedule ID and

push the “Delete Schedule” button.

When your schedules are correctly configured, make sure to activate the schedule control by clicking

on the Schedule button from the main window.

Schedule control – Enabling schedule control

When the Schedule control is enabled, the recordings will start automatically according to the

Schedule list information.

Due to the nature of schedule recording (Start and Stop time), it is not possible to schedule a loop

file recording.

CAUTION: Schedules are executed according to the host PC system’s clock. Therefore make sure that your PC

clock is properly synchronized. Old schedules will be automatically erased from the Schedule list once it is

started or it is recognized by the application as a time in the past.

CAUTION: If a new schedule is added with a Start time before the current time and the Stop time after the

current PC time, the schedule will not start unless the “Auto resume of the current schedule” option (see 5.6.5

Schedule option) is activated.

Enable schedule

control