Specifications

DTC-325

Affordable Tools for Digital-TV Professionals March 2015

5.4.2. Message Logging

All messages generated by the application are logged into the file “DtGrabberLog.txt” which is

created automatically into the Record File directory. The following provides an example of logs

generated by the application with a Multiple File recording with auto-erase rule for maximum 5 files.

It provides details about times where file are created and deleted. In this example, a TS Sync loss is

reported.

2007-02-27 16:50:53 Input Signal Detected

2007-02-27 16:50:55 Recording started

2007-02-27 16:50:55 File created: C:\Record_20070227_165055_00001.ts

2007-02-27 16:50:55 Information: Less than 2GB remaining on your Hard-Disk

2007-02-27 16:51:12 New file created: C:\Record_20070227_165112_00002.ts

2007-02-27 16:51:29 New file created: C:\Record_20070227_165129_00003.ts

2007-02-27 16:51:45 New file created: C:\Record_20070227_165145_00004.ts

2007-02-27 16:52:02 New file created: C:\Record_20070227_165202_00005.ts

2007-02-27 16:52:19 New file created: C:\Record_20070227_165219_00006.ts

2007-02-27 16:52:36 New file created: C:\Record_20070227_165236_00007.ts

2007-02-27 16:52:36 Deletion of old file: C:\\Record_20070227_165055_00001.ts

2007-02-27 16:52:52 New file created: C:\Record_20070227_165252_00008.ts

2007-02-27 16:52:52 Deletion of old file: C:\\Record_20070227_165112_00002.ts

2007-02-27 16:53:06 Input Signal Lost

2007-02-27 16:53:07 Input Signal Detected

2007-02-27 16:53:10 New file created: C:\Record_20070227_165310_00009.ts

2007-02-27 16:53:10 Deletion of old file: C:\\Record_20070227_165129_00003.ts

2007-02-27 16:53:15 Recording stopped

DtGrabber+ Log File – Example of logs generated by the application

Note: by default, the log file is created as “DtGrabberLog.txt” within the Record File directory.

Therefore it is recommended when running several instance of DtGrabber+ on a same host PC to

use separate directory for each recording, or to specify separate log file names per input in the

Options (See section 5.6 for details about Options).