Specifications

DTC-325
© 2006-2015 DekTec Digital Video BV Page 17/44 Manual for DTC-325 DtGrabber+ Software
Affordable Tools for Digital-TV Professionals March 2015
5.4. DtGrabber+ Messages and Logs
5.4.1. Application Messages
The DtGrabber+ application generates messages in the Message Bar, in a Log File and as SNMP
Trap if enabled so. Three levels of message are considered: INFO (Information), WARN (Warning)
and ALAR (Alarm) for Alarm messages when recording or the quality of the recording is affected.
The following table provides the list of all messages:
Message
Level
Comment
Input Signal Detected
INFO
Input Signal Lost
ALAR
Ready
INFO
Recording started
INFO
Recording failed to start
ALAR
Common message for both SDI and TS recording
Invalid input SDI signal. Recording aborted!
ALAR
Specific message for SDI recording
File created: FileDirectory + FileName
INFO
New file created: FileDirectory + FileName
INFO
Only when Multiple File recording
Deletion of old file: FileDirectory + FileName
INFO
Only when Multiple File recording with auto-erase rule
Failed deletion of old file: FileDirectory +
FileName
ALAR
Only when Multiple File recording with auto-erase rule
Hardware Overflow
ALAR
Hardware Overflow. Too many occurrences without
recovery, Buffer is purged
ALAR
Application purges automatically the buffer if too many
occurrences of the overflow
Alarm cleared
INFO
When the user click the [Clear Alarm] button
Recording stopped
INFO
File re-ordering started
INFO
Only after stopping a Loop File recording
File re-ordering finished
INFO
Only after Loop File recording
Information: Less than 2GB remaining on your Hard-
Disk
INFO
WARNING! Less than 200MB remaining on your Hard-Disk
WARN
DANGEROUS! System halted due insufficient Hard-Disk
space
ALAR
If less than 100MB on disk, the application stops automatically
the recording.
Connected to SNMP service
INFO
Failed to connect to SNMP service
ALAR
Disconnected from SNMP service
WARN
DtGrabber+ Log message list
Note that some additional and more detailed information can be displayed in the Message Bar (ex:
Loop File Reordering progress: 75%, ..)