Operation Manual

23
Simple Troubleshooting
Simple Troubleshooting
SYMPTOM REMEDY
GENERAL
Dead. No LED Lit No power to the TV.
Check all connections to the TV including the AC
Dead Led lit red Set still in standby.
Press either the Power button
the Standby
button on the Remote
control.
No signal.
Blue screen.
Incorrect source
selected.
Press INPUT button to select correct source.
Noisy, snowy,
ghosting picture
(TV)
Poor aerial signal.
If using an indoor aerial, try moving the
aerial. Check aerial connections.
Volume set too low.
Check volume settings.
No sound
External leads not
connected "if used".
Check all external leads are connected.
DVD
Will not accept disc DVD not selected
Select DVD with INPUT button.
Disc placed incorrectly
Please insert a 12cm disc according to the
instruction label by the disc slot.
No coax audio
Digital audio setup
incorrect.
Ensure spdif / raw is selected “page 21”.
Screen shows "NO
DISC"
Disc damaged or dirty
Inspect disc. If damaged you must discard.
If dirty see "Disc care' page 22.
22.
Picture "Freezes"
or breaks up
Disc damaged or dirty.
See "Disc care" page
Certain disc functions
not
Disc may not
support required
feature.
Read disc information.
Turn sound "Mute" OFF.
Sound "Mute".
changes
on the TV or
adaptor.