Operation Manual

11
Press the MENU button on the front panel or SYS MENU button on the remote control and then use ɺ/ ɻ
button to select the Video menu, press ɽ button to enter(see the picture below).
1. Use ɼ/ɽbutton to select what you want to
adjust in the Picture menu.
2. Press ɺ/ ɻbutton to adjust.
3. When you are satisfied with your adjustment, press the
SYS MENU button.
Picture Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in the
Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote
control.
Contrast
Adjusts the contrast of the picture.
Brightness
Adjusts the brightness of the picture.
Colour
Adjusts the colour saturation.
NOTE: This option is invalid in PC mode, and it will be shown in grey.
Tint
Adjusts the tint of the picture(in NTSC mode).
Sharpness
Selects sharpness mode of the picture.
Colour Temperature(in VGA mode)
Selects an optimum colour temperature mode to suit your eyes for viewing between Normal, Warm and Cold.
DNR
If the broadcast signal received is weak, you can select the DNR (Dynamic Noise Reduction) option to reduce
the video noise level between Off, Low, Mid and High.
In this manual, the OSD (On Screen Display) may be different from your TV's because it is just an
example to help the TV operation.
PICTURE menu options
PICTURE
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Personal
50
50
50
0
Normal
Off
Normal
Select
Adjust
Colour temperature
DNR