Operation Manual

GettingStarted
11.
Warning: This appliance must be earthed).
1.
HDMI 1 / 2: Connect to the HDMI sockets of DVD player or other equipment.
2.
VGA: PC Display. Connect to the D-Sub 15 pin connector of PC.
4.
PC AUDIO : Connect to Audio output of PC sound card.
5.
S-VIDEO: Connect to S-Video socket of DVD player or similar equipment (video only).
6.
YPbPr :
L/R in: Connect them to the audio output terminal of DVD.
Connect all
to video output connectors of DVD or similar equipment.
7.
VIDEO(CVBS): Connect to AV connector of DVD or similar equipment (Video only).
8.
L/R in: Connect to audio output connectors of DVD or similar equipment when using S-Video
9.
SCART 1 / 2: Connect to Scart connector of DVD or similar equipment.
SCART 1: supports CVBS (AV) and RGB signal inputs.
SCART 2: supports CVBS (AV) only.
10.
RF:
COAX:
TV tuner input. 75 Ohm coaxial socket.
outputDigital to Audio amplifier.
COAX
Power Switch
11
AC POWER IN
Power Switch
: Connect to the power cable.(
12.
3.
USB / SD/MMC/MS: USB jack / Card reader (Operate in DVD mode).
13.
USB SD/MMC/MS
13
12
Common Interface
composite
5