Operation Manual

1. Use / or the VOL buttons on the TV button to select
what you want to adjust in the setup menu.
2. Press
/ button or the VOL buttons on the TV to adjust.
3. When you are satisfied with your adjustment, press
MENU button.
Country
This option allows you to select the country.
Auto Tuning
Press
or OK button to start auto tuning.
Note: Before you perform Auto Tuning, you must choose the country where you are by selecting
COUNTRY option. (In TV mode)
Manual Tuning
Note: Before you perform Manual Tuning, you must choose the country where you are by selecting
Country option. (In TV mode)
SETUP menu options(used in TV/DTV source)
Manual Tuning
Program
Sound System
Colour System
Program Label
AFT
Manual Search
1
I
PAL
Off
471.43MHz
Select
Adjust
Input
SETUP
Country
Auto Tuning
Manual Tuning
Program Edit
Common Interface
UK
Select
Adjust
Auto tuning
Press OK key to start
Enter
Return
OK
MENU
Program: Select the current channel.
Sound System: Select a corresponding sound system.
Colour System: Select a corresponding colour system.
Program Label: Name the current channel, you can also rename the program which you have named.
Press
button to enter, and press / button to select the position, then press /
button or 0-9 button to enter the character, press OK button to confirm.
AFT: Due to weak signals or a wrong antenna configuration, some of the channels may not be turned
to the best reception condition. The AFT function allows you to fine tune the channel selected.
Manual Search: Press
/ button to search tuning when the signal of the current channel is weak.
0-9
Manual Tuning in TV mode
Press the MENU button on the right hand side of your tv or the MENU button on your remote control then use
/
button or the VOL buttons on the TV to select the setup menu, press
or the PR buttons on the TV to
enter the menu. (see picture below).
13