Specifications

4-8 Remote Programming
DS360 Ultra Low Distortion Function Generator
Command Syntax
The four letter mnemonic in each command sequence specifies the command. The rest of
the sequence consists of parameters. Parameters shown in { } are not always required.
Generally, parameters in { } are required to set a value in the DS360. Multiple parameters
are separated by commas. Multiple commands may be sent on one command line by
separating them with semicolons (;).
The present value of a parameter may be determined by sending a query command.
Commands that may be queried have a question mark in parentheses (?) after the
mnemonic. Commands that may ONLY be queried have a ? after the mnemonic.
Commands that MAY NOT be queried have no ?. A query is formed by including the
question mark ? after the command mnemonic and omitting the queried parameter from
the command. The query parameters shown in { } are NOT sent with a query. The query
returns the value of these parameters. Values are returned as a string of ASCII characters.
NOTE: Do NOT send ( ) or { } as part of the command.
Variables are defined as follows:
i, j, k, n integers
x real numbers
All numeric variables may be expressed in integer, floating point or exponential formats
(i.e. the number five can be either 5, 5.0 or 05E1). Strings are sent as a sequence of
ASCII characters.