Specifications

2-10 Basics
DS360 Ultra Low Distortion Function Generator
Parameter LEDs
These LEDs indicate which parameter is currently displayed in the parameter display.
Parameter LEDs
Display LED Parameter
FREQ Output Frequency
AMPL Output Amplitude
OFFSET Output Offset
STARTF Start Frequency for Sweeps
Center Frequency for Bandwidth Limited Noise
STOPF Stop Frequency for Sweeps
Cutoff Frequency for Bandwidth Limited Noise
REL Indicates that the amplitude display is in REL mode. Does not indicate a specific
display.
TONE1 Indicates that Amplitude and Frequency Displays refer to TONE 1. Does not
indicate a specific display.
TONE2 Indicates that Amplitude and Frequency Displays refer to TONE 2. Does not
indicate a specific display.
DEPTH Off Level Depth for Bursts
COUNT Burst Count for Bursts
TRIGR Trigger Source for Sweeps and Bursts
RATE Burst Rate for Bursts