Owner`s manual

25
VCR Operation
24
Changing the on-screen menu language
Press [SETUP] button and select
“LANGUAGE SELECT”.
1
1
Select the language among English,
Spanish or French by pressing [
……
] or
[
††
] buttons. Press [ENTER] to confirm
your selection.
2
2
■ You may select the language in which you would like the VCR’s menu to be displayed: English, Spanish, or
French.
LANGUAGE SELECT
Select a language.
English
Spanish
French
Move: Select:
End:
SETUP
ENTER
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
Move: Select:
End:
SETUP
ENTER
Display (O.S.D)
1
1 Press [DISPLAY] button to display the tape counter, clock and status mode on the
TV screen for a short time.
2
2 And, by one more pressing [DISPLAY] button before disappearing the OSD from the
screen, only the tape counter will remain on the screen.
3
3 Press [DISPLAY] button the third time and the tape counter also disappears from
the screen and to return to the original display.
Press [SETUP] button and select “CLOCK SET”.
Move into “Auto DST” with [†] .
1
1
Press [ENTER] to switch between ON
and OFF.
- Select ON if you want the VCR’s clock to
automatically adjust for daylight-saving
time.
- Select OFF if you do not want the VCR’s
clock to adjust for daylight-saving time.
2
2
SPRING Forward ; Fall Backward
In the Spring, daylight-saving time begins on the first Sunday in April. Because the clock
automatically changes from 2:00 AM to 3:00 AM (forward one hour), remember to include the
extra hour for timer recording falling within this time frame.
In the Autumn, daylight-saving time ends on the last Sunday in October.
The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour). Therefore, it can
affect your recording length.
Daylight-Saving Time
CLOCK SET
Time and Date Set
Auto DST : ON
Move: Select:
End:
SETUP
ENTER
Using advanced features
Press [SETUP] button and select
“FUNCTIONS”.
Select “Index Search”.
1
1
■ When you record a programs, the VCR places an index mark at the start of the recording. To search for an
index mark:
FUNCTIONS
Auto Play: ON
Auto TV/VCR: ON
Index Search
Go-To Search
If you want to search through a certain number
of index marks, press two number buttons to
enter the number of marks you want to search.
Press [CLEAR] on the remote to correct an
entry.
or
Press [REW] to search backward or [FF] to
search forward. The VCR will locate your index
mark and begin playback. If you did not enter a
specific index number, the VCR will locate the
next index mark and begin playback. Press
[STOP] to stop index searching.
2
2
INDEX SEARCH
Press REW or FF
to begin searching
or
Enter a specific
index number
- -
End:
SETUP
• If two
recordings
overlap, the index
mark for the second
program will be
erased. Therefore,
when you use the
index feature to
find the second
program, the VCR
will skip over it.
• If you record
multiple programs
in one recording
session, the VCR
will only find the
index mark that was
placed on the video
cassette tape when
the recording
session began.
Searching a cassette tape for programs (indexing)
Press [SETUP] button and select
“FUNCTIONS”.
Select “Go-To Search”.
1
1
■ You can mark a segment of the video cassette with the tape counter that will help you easily locate the
segment later.
FUNCTIONS
Auto Play: ON
Auto TV/VCR: ON
Index Search
Go-To Search
The tape counter is displayed on the screen.
Input the tape counter you want to go and press
[REW] or [FF], the VCR will search for the time
counter you want.
2
2
GO-TO SEARCH
Current tape counter is
2 : 17 : 18
Press REW or FF
to go to - : - - : 00
Some index
marks that may
be missed by the VCR :
• A mark too close to
your location on the
tape.
• The mark at the
beginning of a
recorded segment of
five minutes or less.
• The first index mark
on the tape when
you start at the
beginning of the
tape.
Searching with the tape counter (go- to search)
Using advanced features
1
1 Use [PLAY], [REW] or [FF] to reach the point on the tape that you would like to
mark as 0:00:00.
2
2 Press [DISPLAY] button to display the tape counter on the screen.
3
3 Press [CLEAR] button to reset the tape counter to 0:00:00.
4
4 You can continue to play the tape or perform other functions with the VCR.
Marking a tape for zero search
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Daewoo Manuals