LCD Television Instruction Manual

38
PIP & POP mode
1. PIP & POP mode when main picture is TV and AV.
• Press the “P.MODE” button, then POP mode will function.
• Press the “P.STILL” button, then Sub screen will freeze.
• If you want to swap main for the Sub, press the “P.SWAP” button.
• If you want to change the sub screen input, press the “P.INPUT” button.
Sub screen changes as follows:
HDMI 1  HDMI 2  HDMI 1
2. POP mode when main picture is Multimedia.
• Press the “P.MODE” button, then POP mode will function.
• Press the “P.STILL” button, then Sub screen will freeze.
• If you want to swap main for sub, press the “P.SWAP” button.
• If you want to change sub screen input, press the “P.INPUT” button.
• Sub screen changes as follows :
TV(DVB)  AV1  AV2  AV3 TV(DVB)
Note :
• If you change main source in POP mode, the POP mode is cancelled.
* PIP & POP mode change as followed.
Main/Sub TV AV1 AV2 AV3 DVB HDMI 1 HDMI 2
TV XXXXXOO
AV1 XXXXXOO
AV2 XXXXXOO
AV3 XXXXXOO
DVB XXXXXOO
HDMI 1 OOOOOXX
HDMI 2 OOOOOXX
Note :
• If AV1 input is R/G/B, PIP&POP is not working.
• S-Video mode does not support PIP&POP funtion.
PR _ _ _ _ _
Mono
Clock 1 2 : 0 0
PR _ _ _ _ _
Mono
Clock 1 2 : 0 0
HDMI1
PR _ _ _ _ _
Mono
Clock 1 2 : 0 0
HDMI1