Electronics INSTRUCTION MANUAL LCD TELEVISION DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3

31
MENU
Program 01
Name - - - - -
CH C02
Frequency 48.25MHz
System W/Euro
Search Adjust
Memorize Adjust
Move Adjust Exit
Manual tuning
MENU
Program 01
Name - - - - -
CH C02
Frequency 48.25MHz
System W/Euro
Search Adjust
Memorize Adjust
Move Adjust Exit
Manual tuning
MENU
Program 01
Name - - - - -
CH C02
Frequency 48.25MHz
System W/Euro
Search Adjust
Memorize Adjust
Move Adjust Exit
Manual tuning
Setting Up TV
Stations
Manual tuning
4. Searching for channel.
• Move the selection bar to the Program with “UP/DOWN” but-
tons.
• Select a programme number you want to tune finely with the
“LEFT/RIGHT” buttons.
• Move the selection bar to the System and select a system which
you want.
5. Enter a station name.
• Move the selection bar to the Name with “UP/DOWN” but-
tons.
• You can enter a station name with the “UP/DOWN”, “LEFT/
RIGHT” buttons.
6. Search a channel finely.
• Move the selection bar to the CH with “UP/DOWN” buttons.
• Search a real channel with the “UP/DOWN”, “LEFT/RIGHT”
buttons.
• Move the selection bar to the Frequency by pressing “UP/DOWN”
buttons
• Adjust the Frequency with the “LEFT/RIGHT” buttons.
Note :
• If you are unable to get a good picture or Sound because of a poor
broadcasting signal, adjustment of Frequency might improve it.
• After tuning, you must memorize to store the Program.
• The alphabet below OSD in the Setup menu only display on English.
• This part does not other language except English.