Electronics INSTRUCTION MANUAL LCD TELEVISION DLT-26C2, DLT-26C3, DLT-32C1, DLT-32C2, DLT-32C3, DLT-37C3

27
POWER
MUTE
DVB/Analog AV MULTIMEDIA
VOL
PR
VOL
MENU
ABC DEF
GHI JKL MNO
PQRS
PICTURE
OK/SELECT GUIDE
SUB TITLE CANCEL/EXIT
TUV
WXYZ
PR
RECALLSTILL ASPECT
SLEEPEDIT S.EFFECT
MGDI
123
456
78
0
9
To Watch TV
On/Off, Number, Mute, RECALL[ ], PR, VOL
Buttons with same name in the main body performs the same function.
Press the “ON/OFF” button of the front or right side of the
set or the “POWER” button of Remote controller.
• You can also turn on the TV using “PR” or digit key in the ST-
BY mode.
Note :
• The buttons of the remote control and the main body operate
only when AC power turn on.
• You must pull out the plug of TV set to shut off the AC Power
When pressing the Program button
• Select two digits if using the number button for channel selection.
For example, to watch the No.9 channel, Press the number but-
ton “0” and “9”. If pressing only number “9” button, it takes longer
time to select the channel.
To suddenly turn sound off
• Press the “MUTE (
)” button.
• No sound is heard if “MUTE( )” is displayed on the screen.
• Sound is heard again if you press the “MUTE (
)” button once
again.
For example, please use this button when telephone rings or
when guest comes while watching TV.
Check of TV operation status
• If pressing the “RECALL [
]” button, status of channel or clock
broadcasting being currently watched or entry status of video
component is displayed on the screen.