Specifications

6
Water Tank:
Water will drain into the tank. When the tank is full and the unit stops operating,
the “Water Full” indicator will flash.
Wait until the machine stops before removing the water tank. Removing it before
the unit completely stops may cause some water to drip.
To empty the water tank, consult the diagram below. Return the water tank to
the same position as when you removed it.
The machine will restart when the water tank is replaced in the correct position.
Continuous Drainage:
1. Carefully remove the drain plug on the rear of the unit. (pictured below)
2. Insert the hose inside of the hole. It should surround the connector that lies
just inside of the hole.
3. Smooth any bends or kinks in the hose.
4. Place the free end of the hose into a suitable drainage facility.