Specifications

5
Installation
Operation
 Install the mobile dehumidifier in a flat and spacious location.
 Do not cover up air vents.
 Do not install underneath desks or inside cupboards because this restricts air
flow.
 Maintain a clearance of approximately 8 in. in front of and behind the unit to
maintain optimal air flow.
Operating Conditions:
 This unit is designed to operate between 55°F and 95°F.
 Allow approximately 3 minutes after switching unit “on” for the correct
operation to resume.
 Do not connect the dehumidifier to a socket that is being used for other
electrical appliances.
 Select a location with easy access to an electrical outlet.
 Use a 115V- 60Hz earthed outlet.
 Ensure the Water Tank is correctly fitted otherwise the unit will not operate
properly.
Turning the unit ON or OFF:
1. Plug the cord into an electrical outlet with the proper specifications (see
Operating Instructions). The unit computer system will do a self-check. If the
check comes back normal, the POWER indicator will flash at 0.5Hz. Press
ON/OFF button at this time. The unit will start operating under factory
settings – 60% humidity. Change this by pressing the HUMIDITY up and down
buttons.
2. By pressing the CONTINUE button, the HUMIDITY up and down buttons will
be disabled and the unit will enter “continuous dehumidifying” mode.
3. Press the ON/OFF button to turn the unit off. (You do not need to unplug the
power cord unless the unit will not be in use for extended periods of time.)
Operation