DVD + VCR HOME THEATER SYSTEM Downloaded From Disc-Player.
◆ Region code of DVD/Video player for home is 2 or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 2 or ALL. ◆ is a ‘Prohibition’ mark. If this mark is displayed in operating the product, please wait for a while, then use it. If " Prohibition" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc. ◆ Press a product button on the remote control then use the product.
Product Information Contents Product Information Important Safeguards ................................................... 2 Advantages of This Product Are .... ............................. 5 Read Carefully before Using ......................................... 6 Identification of Controls .............................................. 7 Remote Control .......................................................... 10 Installation Connecting up your player with RF lead......................
Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 10 1 Read Instructions All the safety and operating instructions should be read before the unit is operated.
Important Safeguards 15 16 17 18 19 20 21 damage to the unit due to lightning and power line surges. Disc Tray Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury. Overloading Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.
Product Information Advantages of This Product Are .....
Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. Installation place and handling_____________ • When you place this player near other devices, they may affect poorly together. • When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected).
Product Information Identification of Controls Front panel ! @ ^ & * ( ) ! Power (STANDBY/ON) button Use to power the device on/off if AC power supply is connected. @ Place to insert videotape Insert the desired tape. # Eject button Use to eject the tape. $ Disc tray % Open/Close Tray button Open or close tray by pressing [OPEN/CLOSE] button. Place a disc on the disc tray, label side up.
Identification of Controls Operation Display Window ! @ # $ % ^ & * ( ) 1 2 34 ! Speaker setup indicator @ Title indicator # Memorized radio stations $ Chapter indicator % Track indicator ^ Sleep time indicator & Playback disc indicator * Dolby Digital indicator ( Prologic II indicator ) Playback indicator 1 Pause indicator 8 Downloaded From Disc-Player.
Rear Panel ! @ % ^ & # $ * () 1 2 ! Power Cord It is a jack for supplying power to the unit. Connect to outlet in a wall. @ Analog 5.1 Speaker Out Jack Connect each of the speaker wires to the satellite speakers. # Connection to Antenna Cable $ AM Antenna Jack % COMPONENT (Y, Pb, Pr) ^ Woofer Out Jack & AUDIO OUT (L/R) * VIDEO OUT ( VIDEO IN ) AUDIO IN (L/R) 1 Connection to TV 2 FM Antenna Jack 9 Downloaded From Disc-Player.
Remote Control “ ‘ ! @ ^ # $ % = & w ( e R q * + Q W E ) 1 r 2 3 4 5 6 7 T t y U u 8 9 I 0 Child Lock!!! Press the power [ ] button of the remote control for about 8 seconds. No buttons of front panel can be operated now and Lock indicator (“ ”) will be displayed on window display. To release child lock, press any button of the remote control. 10 Downloaded From Disc-Player.
Instructions in using remote control • • • • Operate remote control within 7m from the unit. Do not press two buttons at the same time. Do not light up sending part of remote control. Do not keep in the place with much dust and humidity. Accessories Remote Control 2 Batteries Owner’s Manual/ Warranty RF cable FM antenna AM antenna Unpacking The Speakers • one set of speakers including 1 set of left and right front speakers, 1 centre speaker, 1 subwoofer and 1 set of left and right rear speakers.
Connecting up your player with RF lead ■ Before you start, unplug all the equipment from the mains supply. (Option 1) - How to connect with RF lead INPUT 1 INPUT 2 ANT IN Aerial The type of aerial you should use, depends on local interference and how far you are from the transmitter. You should contact a local retailer if you have any questions about your aerial. ¡ Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” jack in rear panel of TV.
Connecting up your player with RF lead ■ Before you start, unplug all the equipment from the mains supply.
FM/AM Antenna connection AM loop antenna (supplied) FM wire antenna (supplied) Connect the supplied FM/AM antennas for listening to the radio. • Connect the AM loop antenna to the AM antenna connector. • Connector the FM wire antenna to the FM antenna connector. • To prevent noise pickup, keep the AM loop antenna away from the DVD Receiver and other component. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible.
Speaker system connection Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.
Connecting with Other Equipment ■ You can connect a wide variety of audio/video equipment to your DVD-Video, including : an additional VCR, Laser Disc Player, DVD Player, Camcorder, Satellite Receiver, Video Game. Since all of these devices use essentially the same connections, they will be described together.
Connecting with Other Equipment Installation ¡ Connect Audio/Video Out jack in Camcorder(or playback video) to Audio/Video In jack in rear panel (or front panel) of DVD-Video with connecting cable. ™ £ Connect “ANT. IN” jack in TV to “TV” jack in DVD-Video with RF cable. To record contents of camcorder or playback video with DVD-Video, insert recording tape attached recording tab in DVD-Video. How to Copy (Edit) Tape with Other VCR or Camcorder ¡ ™ £ ¢ ∞ Turn on DVD-Video.
Connecting with Audio How to Connect with Stereo Unit such as Audio REAR PANEL OF STEREO UNIT REAR PANEL OF DVD-VIDEO (L) AUDIO (R) AUDIO CABLE ¡ Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to In jack of stereo sound unit. ™ For Input Select in stereo unit, Select “External Input” connected with DVD-Video. £ Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit. 18 Downloaded From Disc-Player.
Connecting to a television with Component jack and a Dolby Digital Amp. Installation ■ Use in COMPONENT In jack attached in TV or amp supporting Dolby Digital. How to Connect REAR PANEL OF DVD-VIDEO COMPONENT IN TV CONNECTIONS Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 19 Downloaded From Disc-Player.
Initial Installation ■ Switch the TV on. ■ You can also start "AUTO SEARCH" in the SETUP "PR PRESET" "AUTO SEARCH". ■ To tune in new stations (manual tuning) and to enter station names see page 25-26. Setting up the player CHECK IT! • If you don't see the menu picture below after you press the menu button it may be because you don't use a RCA cable and you need to tune the television to the player (see 'Connecting your player through RF lead' on page 12).
Initial Installation 6 The player recommends the optimal RF OUTPUT CH number automatically. Installation 5 If other stations are positioned on near the current RF OUTPUT CH, the guide message appears automatically. RF OUTPUT SET CURRENT RECOMMENDED CH 52 CH 54 0-9:SELECT(21-69) OK:CONFIRM SETUP:END Press the [OK] button to confirm the recommended RF channel.
Setting time and date / OSD ON & OFF Setting time and date ■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure below. 1 Call the player’s "SETUP", choose "VCR SETUP", then "CLOCK SET". CLOCK SET TIME - - : - DATE - - / - - /- - - 0-9:SETUP (HOUR) œ/√:CORRECT SETUP:END 2 Move to the position you want to change and type in the new values. Wait a few seconds after typing a one-digit number.
Output Select Installation To Select DVD Press [DVD] button. If DVD mode is correctly selected, DVD indicator on the front panel is lighted. Then, remote control button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the DVD OPERATION mode. To Select VCR Press [VCR] button. If VCR mode is correctly selected, VHS indicator on the front panel is lighted. Then, remote control button works as VCR function.
VCR Playback 1 Press [ ] button to power on. 2 Insert the desired tape. 3 If you want to playback it, press [PLAY/PAUSE] button. 4 To stop it, press [ ] button. 5 Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote control to remove the tape. Press [VCR] button of remote control to change into VCR mode. When the operational status is flickering or poor, adjust it with [TRACKING +/–] button. For pause, press [PLAY/PAUSE] button in playback mode.
Tuning in New Stations ■ The TV and player are switched on. ■ To see the picture from your player, press the station button on the TV reserved for player input or the AV (Audio / Video) button. ■ "AV1/2" should not be selected with the AV button on the player. Tuning VCR Operation 1 To complete the set-up of your video recorder when the auto set has not stored all of the channels or when you wish to store a new channel. Call the video’s "SETUP", choose "PR PRESET".
Tuning in New Stations Station names ■ If your player is showing no station name or is showing a station name incorrectly, you can correct this. 1 2 Call this menu (just see the previous page), if it isn't displayed. Select NAME position. Press the [0] button to change the given name. Or press the [1] button to create the station name. Either select the name from the stored list or you create the station name and enter a 4-digit name.
More Functions ■ The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. ■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Clock / counter display STOP SP 14:00 08/06 PR01 ARD STEREO ON VCR Operation Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear.
More Functions Resetting the counter to zero COUNTER RESET Reset the counter. 0:00:00 AUTO REPEAT If you press the [PLAY/PAUSE] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays repeatedly the tape from the beginning to end parts. To release this mode, press the [ ] button or mode operation button. (PLAY, FF, REW or STOP) SETUP languages Call the player’s "SETUP", choose "VCR SETUP", then "LANGUAGE SET". Select your language. Confirm.
More Functions Cassettes PAL and ... Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by when no tape is played and no station is received for more than 5 minutes. 29 Downloaded From Disc-Player.com Daewoo Manuals VCR Operation Use only good quality tape cassettes with the VHS logo. •Keep cassettes away from excessive moisture or dust, magnetic and electrical fields (loud speakers and computer monitors, for example).
More Functions The Hi-Fi system Your player machine is equipped with a high-quality Hi-Fi sound system.
More Functions Choice of sound output During a stereo performance (playback-”Hi-Fi”/ broadcast “STEREO”): Hi-Fi stereo left audio channel only right channel only the normal mono sound track of a Hi-Fi cassette PLAY • During broadcasting a bilingual performance : Main language (original sound track) sub-language (dubbed) both main language and sub-language OFF.
Connections and Assembling ■ If you are using a RCA cable, select the AV input on the TV to see the picture from the player. ■ If you are not using a RCA cable, select the button number on the TV reserved for video input to see the picture from the player. To the TV via antenna cable (if you are not using a RCA cable) If you are not using a RCA cable, your player can transmit pictures and sound to the TV via the coax aerial cable.
DVD initial setting LANGUAGE Setup ■ A user can set OSD language, Audio, Subtitle and Disc Menu. …/† †] Select “Audio” by pressing [… button. 3 …/† †] Select “Subtitle” by pressing [… button. Set it as the preferred audio language. In case the audio language is set and recorded in the DISC, it is automatically played in the set language in every playing. Please set it as the preferred language.
DVD initial setting DISPLAY Setup ■ A user can set up a connected TV condition and screen. 1 2 While STOP or RESUME STOP, press [SETUP] button. By pressing [œ / √] button, select “Display”. …/† †] Select “Aspect Ratio” by pressing [… button. Press [ENTER] button to select the desired setting.
DVD initial setting AUDIO Setup ■ A user may select audio menu according to a user’s speaker set. While STOP or Resume STOP, press [SETUP] button. Language Display 2 Select “Dynamic Range” by pressing …/† †] button. [… Language Display 3 Select “Speaker Setup” by pressing …/† †] button. [… 4 After selecting “Speaker” by pressing …/† †/œ/√] button, adjust the Level by [… pressing [√√/œœ ] button and adjust the Delay by pressing [❚œœ √√❚] button.
DVD initial setting 5 To hear the test tone of speaker is set, press [√ /❚ ❚] button. Speaker Setup LEFT Type: Small Level: 0.0 dB Delay: 0 ms CENTER RIGHT Type: Small Type: Small Level: 0.0 dB Level: 0.0 dB Delay: 0 ms Delay: 0 ms Speaker Setup : Default Type: On Level: 0.0 dB Type: Small Level: 0.0 dB Delay: 5 ms L. SURR. Select: … † œ √ R.SURR. Test Tone: √ /❚ ❚ Level: œœ √√ 6 Select “SPEAKER SETUP: DEFAULT” between CENTER and SUB. W in the Speaker Setup menu and press [ENTER] button.
DVD initial setting RATINGS Setup 1 “Parental Lock” activates only if you set a password and the unit goes into Lock status. When the disc has no parental function even if the disc for adult only, Parental Lock doesn’t activate. 2 Entering a NEW password. 3 …/† †] Select “PARENTAL”by pressing [… button. Input password display appears. Enter a user’s password by pressing 4 [Digit] buttons. Press [ENTER] button to select the desired setting. Then input password to enter into ratings screen.
DVD Playback 1 2 Press [ ] button to power on. Press [DVD] button of remote control to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upward. Insert the disc and press [OPEN/CLOSE] button to close the tray. The disc tray is closed and after checking the disc’s condition, Playback or Stop function starts to operate. 3 To playback it, press [PLAY/PAUSE] button.
Playing a desired scene To skip scenes in a disc DVD, VCD, CD, MP3 To move to next chapter (or track), press [NEXT √√❚ ] button. The current chapter (or track) moves to the next chapter (or track). Press [❚ œœ PREV] button. The current scene moves to the previous chapter (or track) or first scene of current chapter (or track). Directly moving to a desired title (DVD) DVD, VCD 1 Press the [TITLE/PBC] or [MENU] button.
Playing a desired scene Book Mark DVD ■ Once memorising a scene, the user may watch it anytime. 1 To memorise a scene, press [MARK] button while DVD playing. Then press [ENTER] button to save a scene. [_] _ _ _ _ * Moving cursor with [œ/√] button to select the saving position, up to 5 scenes can be memorised. 2 To play a memorised scene, 3 To erase a memorised scene, 40 Downloaded From Disc-Player.com Daewoo Manuals press [MARK] button.
Playing a desired scene Playing a programmed order VCD, CD While STOP, press [PROGRAM] button. 1 While the figure is appearing, please select desired track by pressing […/†] and [ENTER] button.
Playing a desired scene Repeating a defined period from A to B DVD, VCD, CD ■ You may repeat a defined period from A to B. A MP3 disc may not be repeated from A to B. 1 At the point where you want to start the repeat playback, press [A-B] button. 2 At the point where you want to end the repeat playback, press [A-B] button again. A B The right figure appears and repeat playback start position (A) is set.
Playing a desired scene Searching VCD and CD with a track number or time 1 Press [SEARCH] button. VCD, CD T _ _0 01:46:03 T 001 _ _:_ _:_0 It shows the track numbers and times. If you want to search with a track number, please enter the new track numebr to be searched using the [NUMBER] or […/†] button. 2 If you want to search with a time, 3 In completing entering, please press [ENTER].
Confirming the current PLAY mode on screen Confirming the current DVD disc mode 1 While in playing, press [DISPLAY] button. 2 Press [DISPLAY] button again. 3 Press [DISPLAY] button again. DVD T 001 C 020 01:46:03 It shows the current title, current chapter and time elapsed. 1/4:Dolby Digital, 5.1Ch. -English It shows the audio selected. 1/4:Subtitles Off 2/4:Chapter It shows the subtitle selected and repeat playback mode . To exit from Display mode, press [DISPLAY] button again.
Confirming the current PLAY mode on screen Confirming the current MP3 disc mode Display screen appears automatically in Playback mode. It shows the MP3 File information in disc, the directory, MP3 File name and directory list. With […†] buttons, you can move the cursor to MP3 Music File. To playback MP3 File, press [ENTER] button. MP3 Track List > +000 / +001 CD01 002 A Track001.mp3 003 A Track002.mp3 004 A Track003.mp3 005 A Track004.mp3 006 A Track005.mp3 007 A Track006.mp3 008 A Track007.
AUDIO, SUBTITLE language and SOUND FIELDS ■ The user may select an audio language and subtitle language if a disc includes Multi-language. Selecting an audio language Press [AUDIO] button. It shows the audio information DVD disc includes. A certain disc may not support audio select or subtitle select. DVD 1/4:Dolby Digital, 5.1Ch. -English The user can select each audio information by using […†] buttons. In completing selecting, please press [AUDIO] button one more.
ZOOM, Multi Angle Using a zoom function DVD, VCD, VCD2.0 ■ The user can enlarge the current screen about 2, 4 or 8 times. While playback or still mode, press [ZOOM] button till the right figure appears. Every time the user presses [ZOOM] button, a zoom magnification changes 2 times (X2) ➝ 4 times (X4) ➝ 8 times (X8) ➝ OFF ➝ 2 times (X2) ... one by one. A base point to be enlarged is center and the point can be changed with the operation of […†œ √] button.
About MP3 discs Playing a disc containing MP3 files MP3 This unit will play MP3 files recorded on CD-R and CD-RW discs. 1 2 3 4 5 6 Turn on your television and select the program assigned to this DVD player. Press the DVD open [OPEN/CLOSE] button, the disc tray opens. Put a disc containing MP3 files on the disc tray with the label side up. Press the DVD open [OPEN/CLOSE] button, the disc tray closes. The unit will take a short while to load the disc and display the directory structure.
Displaying menus in a disc To display menus in a disc DVD, VCD2.0 ■ If a disc includes menus, the user may use them. 1 Press [TITLE/PBC] or [MENU] button. • It shows menus in the disc. Also they are different according to discs. • If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button. * CD and VCD1.1 do not support the function. 2 Move a cursor to a relative item with arrow buttons of […†œ √] button and select one with [ENTER] button or [PLAY] button.
Recording To Record With VCR 1 2 3 4 5 6 7 Press [ ] button to power on. • Press [VCR] button of remote control to change into VCR mode. Insert a recordable tape. Insert a tape with recording tab. With [PR/PRESET], [NUMBER] and [INPUT] buttons, select the desired broadcasting channel or external input unit to record. Select the desired speed (SP or LP) with [SPEED] button. Press [REC] button. Then, it starts recording. If you want to pause recording, press [PLAY/PAUSE] button.
Recording To Record From DVD To Videotape during DVD playback 1 Press [DVD] button of remote control to change into DVD mode. Insert the desired DVD disc. When it is a DVD disc with copy protect function, you can’t copy it. Insert a recordable tape. 2 3 Play the DVD disc and press [REC] button. DVD plays and VCR starts recording. To exit copy, press [ ] button. Also it stops automatically when DVD playback is finished or recorded tape is reached to the end. * When the disc sets DTS 5.
Timer Recordings NORMAL TIMER RECORDING ■ For timer recordings, clock, date, and stations must be set correctly. ■ Load a cassette with its safety tab in place and with sufficient free space for the recording. 1 Call the player’s "SETUP", choose "TIMER PROGRAM". Decide if you want to record "ONCE", "WEEKLY" or "DAILY"... ... and confirm.
Timer Recordings TIMER REVIEW - CHANGING AND ERASING 1 Call the player’s "SETUP", choose "TIMER PROGRAM". TIMER PROGRAM PR 03 START END DATE 21:20 22:20 14/06 01 ------- 18:10 -- : --- : --- : --- : --- : --- : -- …/†:SELECT OK:CONFIRM 2 Select the programming to change or erase. If you want to erase this programming press button [0]. If you wish to make changes: Move to the position you want to change using the [œ/√] buttons. Change the settings using the […/†] or [number] buttons.
Presetting the radio stations ■ You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum. 1 2 3 4 5 Press [FM/AM] button until the FM or AM appears in the display window. And then every time you press [FM/AM] button, FM and AM changes alternately. Press and hold [TUNING –/+] button for about two seconds until the frequency indication starts to change, then release. Scanning stops when the DVD Receiver tunes in a station.
Listening to the radio ■ Preset radio stations in the DVD receiver’s memory first (see “Presetting radio stations” on the previous page). 1 Press [FM/AM] button until AM or FM appears in the display window. 2 Press [PR/PRESET] button repeatedly to select the preset station you want. 3 4 The last received station is tuned in. Each time you press the button, the DVD receiver tunes in one preset station at a time.
RDS (Radio Data System) function ■ RDS (Radio Data System) RDS means Radio Data System, a feature that allows you to receive the radio channel that sends the letter data, for example Weather, News, Affairs, Sports... etc.,. This unit can receive the RDS signal with the help of a FM/AM tuner and display the letter data on the display window. To receive the RDS signal 1. Press [FM/AM] button until the FM or AM appears on the display window. 2.
Speaker Setup for enjoying the surround sound effect Surround Sound Audio Components DTS Digital Surround, Dolby Digital and Dolby Pro Logic technologies can be used to enjoy 3-dimensional sound effects with video image. We recommend you use the following devices. • Hi-Fi Stereo VCR to play the program sources. • Large screen TV monitor for a high-quality video image. • Use the program sources (e.g. LD, DVD, VIDEO TAPE etc.
Speaker Setup for enjoying the surround sound effect Speaker Positioning A typical speaker setup uses 6 speakers: 2 front speakers, a center speaker, 2 rear speakers, and a subwoofer. Add a subwoofer to hear excellent bass sound, DTS digital surround or Dolby Digital surround. Set up a listening position; a couch or chairs, etc. as shown in the speaker positioning example.
Delay Time Setting ■ In Dolby Digital or Dolby Pro Logic mode it is assumed that the time it takes the sound from each speaker to reach the listener, is the same. But if the time interval from the center or rear left and right speakers to the listener is closer than the time interval from the listener to the front left and right speaker, the sound of center or rear left and right speaker will reach the listener first; instead of the sound of the front speakers.
Delay Time Setting How to set delay time 1 Each time you press the [DELAY] button, the setting of speaker is changed belows. FL (Front Left) ➝ CT (Center) ➝ FR (Front Right) ➝ SL (Surround Left) ➝ SR (Surround Right) You can select delay time by pressing †/…. • Front, Center Speaker : 0~15ms • Rear Speaker :0~30ms (But, sound field is in MOVIE or PL EMUL mode, it is possible to adjust up to 40ms) 2 60 Downloaded From Disc-Player.
Setting the sound level Setting the sound level of the desired channel 1 Press [LEVEL] button. 2 Press [LEVEL] button to select a desired speaker to set. 3 … / †] button to adjust the sound level of the selected Press [… channel. (-7.5 dB ~7.5 dB) 4 Each time you press the [LEVEL] button, it changes in the following order; FL (Front Left) ➝ CT (Center) ➝ FR (Front Right) ➝ SL (Surround Left) ➝ SR (Surround Right) ➝ WF (Subwoofer). LEVEL VOLUME LEVEL VOLUME 7.5 6.5~7.0 42 43 2.5~3.0 1.5~2.
About DVD Playable Disc • DVD, Video CD (Version 1.1, 2.0), S-VCD and Audio CD Disc type DVD Playable Possible Restriction Region number 2 or Region number All (DVD-5, DVD-9, DVD-10, DVD-18) Video CD CD CD-G Possible Possible Possible Version 1.0/1.1/2.
About DVD Terms related with DVD CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a screen can be quickly searched with the chapter number. TITLE It means the information recorded in a DVD. A DVD can be divided into may titles. TRACK It means the information recorded in a video CD and audio CD. A disc consists of many a track, for which a user can search a certain position.
Basic information about VCR and Videotape Terms related with VCR AFT Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition. CABLE Cable television. Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you locate a particular segment of the tape quickly and easily.
Before doubting about troubles (DVD) Symptom Checks • The player does not play. ➤ If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region code 2 or All. ➤ Please check whether a DVD is inserted in a right direction. ➤ If it is a CD-ROM for PC or DVD-ROM, it does not work. • No sound comes through.
Before doubting about troubles (VCR) Symptom Checks • “Power On” does not work. ➤ Please check whether a power plug is inserted in an electric outlet. • It does not work even in “Power On”. ➤ Please check whether a videotape is inserted in. ➤ Try to insert a plug again. • A videotape is not inputted in. ➤ Please check whether a power plug is inserted in an electric outlet. ➤ Please check whether a videotape is in.
Before doubting about troubles (VCR) Symptom Checks • A screen at pause is trembling or slow screen is not clear. ➤ Try to use a head-cleaner. ➤ Try to adjust the screen by [TRACKING+/–] button. • Recording a TV program is impossible. ➤ Please check whether a channel is fixed on video. If not, you have to turn it into “TV” by pressing [INPUT] button. ➤ Please check whether the timer recording info is right.
Specifications Power 200-240V~ AC 50/60Hz Consumed electricity 75W Weight 7.15kg Dimension (WxHxD) 430mm x 103mm x 370mm Operative temperature +5°C~40°C Installation condition Horizontal / Relative humidity under 80% Signal type PAL COLOR Antenna Input/output U/V-mixed: 75Ω unbalanced VIDEO input 1.0 Vp-p unbalanced, RCA JACK AUDIO input -8.8dBm, RCA JACK VIDEO output VIDEO output terminal, 1.0 Vp-p unbalanced, RCA AUDIO output Audio output terminal : -5.8dBm(VCR), 2.
Quick-start guide ■ Please follow this guide from the beginning to the end. Before you start, unplug all the equipment from the mains supply. Stage 1. Connecting the Player to your TV A INPUT 1 INPUT 2 ANT IN B C Fit the batteries into the remote control. Make sure that the (+) and (-) marks on the batteries agree with the (+) and (-) marks inside the battery compartment. Plug your aerial into the ANT IN socket of the player.
Quick-start Guide Stage 3. Tuning in your TV A LANGUAGE SET B ENGLISH PYCCKNZ ÔESKY MAGYAR …/†:SELECT OK:CONFIRM SETUP:END C D Plug the player into the mains and turn it on by pressing the POWER button. RF 52 will now be displayed on the front panel. Tune a spare channel of your TV until you see the blue ‘Language Set’ screen. Select the wanted language with … or † button. Press OK to confirm. Store this setting on your TV.
