Specifications

77
Fig. 14
14. Then remove the torque wrench.
15. Tighten the camshaft sprocket screw
to 55 Nm.
16. Remove:
> Camshaft locking tool
> Crankshaft locking tool
17. Screw the plug in.
18. Fit the crankshaft belt pulley. The notches
must be aligned to the nipple on the
crankshaft sprocket (Audi).
19. Tighten the screws on the crankshaft belt
pulley to 25 Nm (Audi 20 Nm).
20. Install the components in reverse order
of removal.
21. Record the replacement of the original
ContiTech timing belt on the sticker
provided and aix it in the engine
compartment.
22. Test run the engine or take a test drive.
ContiTech Technical Info / Installation Tips