Specifications

76
7. Place the timing belt around the camshaft
sprockets and the water pump belt pulley.
8. Fit the locking tool (no. 3391) on the
camshafts.
9. The crankshaft locking tool must be itted.
(ig. 12)
10. Place the timing belt around the guide
roller, crankshaft sprocket and tensioning
pulley. (ig. 13)
11. Slightly turn the tensioning pulley to
the right. Use an 8 mm hex key for this.
Remove the locking pin from the tensioner
casing to release the push rod.
12. Apply the torque wrench to the hex socket
of the tensioning pulley.
13. Tension the timing belt to 15 Nm by turning
to the left.
Fig. 13
Fig. 12
ContiTech Technical Info / Installation Tips