Specifications

75
Fig. 11
9. Remove:
> The screws of the crankshaft belt pulley
(not the crankshaft pulley screw!!)
> The crankshaft belt pulley
> The viscous fan mount
Note:
The two screws on the mount can be
reached through the hole in the belt pulley
(Audi).
> Remove the lower timing belt cover
> Remove the timing belt
When removing the tensioning pulley,
remember to put the spacer back between
the engine and the tensioning pulley.
(ig. 11)
Installation:
1. Remove the screw of the camshaft
sprockets.
2. Screw an M10 screw into the camshaft
as a counter bearing for the camshaft
sprocket remover.
3. Loosen and remove both camshaft
sprockets from their tapered end. Use the
remover no. 3032.
4. Install:
> Mounting plates
> Screws
5. Slightly tighten the screws for the camshaft
sprockets.
6. The camshaft sprockets must turn easily
without tilting.
ContiTech Technical Info / Installation Tips