Specifications

64
Removing timing belt
4. Turn the crankshaft to the right until the
timing mark on the crankshaft pulley aligns
with the tip on the engine block.
(ig. 4)
5. On camshaft sprockets with a single timing
mark, make sure that the mark of the
respective camshaft sprocket is aligned
with the marks of the valve cover. On
camshaft sprockets with two timing marks,
check that the “INTAKE” and “EXHAUST”
timing marks are aligned with the marks of
the valve cover. (ig. 5)
Fig. 5
Fig. 4
ContiTech Technical Info / Installation Tips