Specifications

This engine, and its equivalents in diferent
engine sizes, is installed in other Opel vehicles
in large numbers and initially does not seem
to raise any questions with regard to changing
the timing belt under normal circumstances,
even for mechanics unfamiliar with it. However,
critical mistakes are often made with regard
to adjusting the tensioning pulley. To ensure
that changing the belt goes smoothly, we have
provided mechanics with installation tips which
are clear in our view.
Installation Tips – changing timing belts
As an example
Opel 1.8i 16V C 18 XE
62
Change interval recommended
by vehicle manufacturer:
> Replace every 60,000 km or every 4 years
(the tensioning pulley, guide pulleys and
water pump should be replaced at the same
time).
Labor time:
> Astra F – 1.8: 0.90 hours
Special tool:
> Camshaft locking tool, e.g. Multi-Lock from
the Tool Box.
ContiTech Technical Info / Installation Tips