Specifications

51
Installation:
> Adjustment work on the timing belt may be
carried out only when the engine is cold.
> Tensioning pulley: the lug of the base plate
must be located in the recess (7.1)
> Check the TDC markings and readjust as
required.
> The tensioning pulley must be locked using
the locking pin and ixed to the stop on the
right (6.3).
> Turn the camshaft sprocket clockwise to
the stop.
> Turn the injection pump sprocket clockwise
to the stop.
> Place the timing belt around the crankshaft,
tensioning pulley, camshaft sprocket, coolant
pump, and high-pressure pump, in that order.
> Loosen the nut of the tensioning pulley.
> Remove the special tool (locking pin).
> Ensure that the tensioning pulley is
positioned correctly.
7.1
Fig. 7
ContiTech Technical Info / Installation Tips