Specifications

Problem:
The tensioning pulley supplied in the kit is designed diferently
from the pulley previously installed in the vehicle.
Cause:
There is an alternative design. This is supplied with the
same screw and can be installed according to the vehicle
manufacturer‘s speciications.
Solution:
Despite its diferent designs, the tensioning pulley can be used
for all the vehicles speciied in the catalog.
Alternative design
Previous design
Comparison of base plates
CT 1035 K1 / K2
Renault 1.5 dCi, Nissan 1.5 dCi, Suzuki 1.5 DDIS
ContiTech Technical Info 21
Change in the tensioning pulley