EN Dishwasher / User Manual DA1E6FI0ES-DA1E6FW0ES
Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS ................................................................................................ 1 1.1. General Safety Warnings ..............................................................................................1 1.2. Installation Warnings .....................................................................................................1 1.3. During Use................................................................................................................
8.CCLEANING AND MAINTENANCE ............................................................................... 20 8.1. Filters ........................................................................................................................... 20 8.2. Spray Arms ..................................................................................................................20 8.3. Drain Pump ................................................................................................................
1. SAFETY INSTRUCTIONS 1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. • Packaging materials protect your machine from any damage that might occur during transportation.
2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void. Check that the indoor electrical fuse system is connected in line with safety regulations. All electrical connections must match the values on the plate.
pressure exceeds 1 MPa, a pressure relief valve must be fitted between the connection. 3. During Usage • This machine is for domestic use only; do not use • it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher. Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse. Do not drink water from the machine.
the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a programme has ended. Do not stand in front of the door after the auto-open signal sounds. In the case of a malfunction, repair should only be performed by an authorised service company, otherwise the warranty will be void. Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap.
CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
2. INSTALLATION 2.1. Machine positioning When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C. Read all warnings located on the packaging before removing the packaging and positioning the machine. Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
2.5. Electrical connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical Specifications" table". H1: min A H2: min B1 H3: min B2 The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current.
3. TECHNICAL SPECIFICATIONS 1 12 3.2. Technical specifications Capacity 13 place settings Dimensions (mm) Height Width Depth 850(mm) 598(mm) 598(mm) Net weight 41 kg Operating voltage / frequency 220-240V 50 Hz, Total current (A) 10(A) Total power (W) 1900(W) 2 11 3 4 5 10 6 7 9 8 13 3.1. General appearance 1. Worktop 2. Upper basket with racks 3. Upper spray arm 4. Lower basket 5. Lower spray arm 6. Filters 7. Rating plate 8. Control panel 9. Detergent and rinse-aid dispenser 10.
4..3 Fill the salt (IF AVAILABLE) To add softener salt, open the salt compartment cap by turning it counter clockwise. (1) (2) At first use, fill the compartment with 1 kg salt and water (3) until it is almost overflowing. If available, using a funnel (4) will make filling easier. Replace the cap and close it. After every 20-30 Cycles add salt into your mach until it fills up (approx. 1 kg). 4. BEFORE USING THE APPLIANCE 4.1.
4.4 Test Strip Run water through the tap (1min.) Keep the strip in the water (1sec) Shake the strip. 1 second 1 munite Wait (1min.) Set the hardness level of your machine. 1 2 3 4 5 6 1 munite NOTE: The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices. 4.5 Water Hardness Table Level German dH French dF British dE Indicator 1 0-5 0-9 0-6 L1 is seen on the display.
Add the proper detergent for the selected program to ensure the best performance. The amount of detergent needed depends on the cycle, load size, and soil level of dishes. Do not fill detergent into the detergent compartment more than required; otherwise you can see whitish streaks or bluish layers on glass and dishes and may cause glass corrosion. Continued use of too much detergent may cause machine damage. Using little detergent can result in poor cleaning and you can see whitish streaksin hard water.
Level Brightener Dose Indicator 1 Rinse-aid not dispensed r1 is shown on the display. 2 1 dose is dispensed r2 is shown on the display. 3 2 doses are dispensed r3 is shown on the display. 4 3 doses are dispensed r4 is shown on the display. 5 4 doses are dispensed r5 is shown on the display.
5. LOADING YOUR DISHWASHER For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings. WARNING: To avoid any possible injuries, place long-handle and sharppointed knives with their sharp points facing down or horizontally on the baskets.
Height Adjustable Rack (peg type) The height adjustable racks enable glasses and cups to be placed on or under the racks. The racks can be adjusted to 2 different heights. Cutlery and utensils can also be placed on the racks horizontally. Height adjustment The upper basket includes a mechanism which enables the height of the basket to be adjusted up (1) or down (2) without having to remove the basket.
5.2.
6. PROGRAMME TABLE P1 P2 P3 P4 P5 P6 Prewash Quick 30’ Eco Super 50’ Intensive Hygiene Type of Soil: Suitable to rinse dishes that you plan to wash later Suitable for lightly soiled dishes and quick wash. Standard program for normally soiled daily using dishes with reduced energy and water consumptions. Suitable for normally soiled daily dishes with faster program. Suitable for heavily soiled dishes. Suitable for heavily soiled dishes requiring hygienic washing.
7. THE CONTROL PANEL 1 9 8 4 10 4. Remaining Time Indicator Programme flow can be monitored via the Wash, Rinse, Dry, End indicators (10) and Remaining Time Indicator. 7 2 6 3 5 2.1 6.1 3.1 5.1 1. On/Off Button 2. Program Selection Button 2.1. Program Indicators 3. Delay Button 3.1. Delay Indicator 4. Remaining Time Indicator 5. Energy Save Button 5.1. Energy Save Indicator 6. Half Load Button 6.1. Half Load Indicator 7. Start/Pause Button 8. Rinse Aid Indicator 9. Salt Indicator 10.
NOTE: Child lock is activated/deactivated by pressing the Energy Save button (5) for about 3 seconds. When it is activated, all leds blink and “CL” is shown on the Remaining Time Indicator (4) once. When it is deactivated, all leds and “CL” blink twice. 7.2 Cancelling a programme If you would like to cancel a programme when it is running. NOTE: To save any program as favourite program, press Program (2) and Delay (3) buttons at the same time.
Buzzer Sound Control (Model Depending) To change the buzzer sound level, follow the below steps: 1. Open the door and press Half Load (6) and Energy Save (5) buttons at the same time for 3 seconds. 2. When sound setting is recognized, buzzer gives a long sound and machine will display last set level, from “S0” to “S3”. 3. To decrease sound level press Energy Save button (5). To increase sound level, press Half Load button (6). 4. To save the selected sound level, turn off the machine.
8. CLEANING AND MAINTENANCE To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove the metal filter (3).Rinse the filter with lots of water until it is free of residue. Reassemble the filters. Replace the filter insert, and rotate it clockwise (4).
8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements. In this case: 1. First always disconnect the appliance from the power supply. 2. Take out baskets. 3. Remove the filters. 4. Scoop out water, use a sponge if required. 5.
9. TROUBLESHOOTING FAULT The programme does not start. Water remains inside the machine. Machine stops during washing. Shaking and hitting noises are heard during a wash operation. Partial food wastes remain on the dishes. POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Your Dishwasher is not switched on. Switch your Dishwasher on by pressing the On/Off button. Fuse blown. Check your indoor fuses. Water inlet tap is closed.
FAULT Whitish stains remains on dishes. POSSIBLE CAUSE TROUBLESHOOTING Not enough detergent used. Use the correct amount of detergent, as instructed in the programme table. Rinse aid dosage and/or water softener setting set too low. Increase rinse aid and/or water softener level. High water hardness level. Increase water softerner level and add salt. Salt compartment cap not closed properly. Check that the salt compartment cap is closed properly. Drying option is not selected.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Make sure the water inlet tap is open and water is flowing F5 Insufficient water Separate the inlet hose from the tap and clean the filter of the hose. Contact for service if the error continues. F3 Continuous water input Close the tap and contact for service. Water discharge hose and filters may be clogged. F2 Inability to discharge water Cancel the program. If the error continues, contact for service.
https://daewooelectronics.
