User guide

24 www.AutoEnginuity.com
Live Data Graph
The Live Data Graph gives you the ability to watch two live
sensors in each graph report from the vehicle. In the Live Data
Graph, the information is viewed as plotted data instead of numeri-
cal data.
Adding a sensor to be viewed is easy, select the sensor from the
Live Vehicle Sensors list above a graph, or left- or right-click on the
graph area and select the sensor from the drop-down list. If you left-
click, the left-most live sensor will be set. If you right-click, the
right-most live sensor will be set.
On the left side of the graph area is the units of measure and the
minimum and maximum values for the left-most live sensor. The
current live sensor value is shown at the bottom of the graph on the
left side. The color of the units, minimum and maximum, and cur-
rent value are displayed in the same color as the plot for the left live
sensor. Color coding the live sensor parameters and plot makes it
easy to quickly identify which plot you are looking at. The right-
most sensor will follow the same rules as the left, but the informa-
tion will be on the right and the color will be the same as the right-
most plot.